Spray molybdenum wire is used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc. Molybdenum spraying wire is also sprayed onto machine parts such as bearing for repair purposes. Furthermore, molybdenum spray wire is applied as an intermediate layer.
Due to its high abrasion and wear resistance, molybdenum has become an indispensable material for metal spraying technology. Thin layers of molybdenum are sprayed thermically on surfaces of mechanically strongly stressed automobile parts, such as piston rings, synchronizer rings, shift elements, to increase their abrasion resistance.
Furthermore,spray molybdenum wire is applied as an intermediate layer in the case of repairs of machine parts, such as bearing shells and shafts, because of the lacking adhesion of steel layers to steel without intermediate molybdenum layers.
Compared with spray molybdenum wire, spray molybdenum rods are mainly used for the worn parts of the spraying vehicles, turbines, gears, shafts, piston rings, ring gear synchronization, metallurgical furnace tuyere, molds and other mechanical wear of the surface. They are the best coating materials to increase their wear resistance.
Spray molybdenum wire is used in the surface spraying of auto wear parts and mechanical wear surface to enhance its wear resistance.
If you have any interest in spray molybdenum wire, please feel free to contact us by email: email@example.com firstname.lastname@example.org or by telephone: 86 592 512 9696.